![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 2, '02 From Portland, Oregon Currently Offline Reputation: 0 (0%) ![]() |
I recieved my motor today. Here's some pics. The mine's ECU almost makes me believe that this might be a standard 185 motor with the W/A IC swapped over. This is supported by the fact that I asked for the AFM and he sent me a standard 185 one. Is there any other way to check to verify that this is an RC motor? Thanks. (Deph in particular
![]() ![]() ![]() ![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 1, '03 From Michigan Currently Offline Reputation: 0 (0%) ![]() |
RC ECU wiring is similar to the 92-93 standard ST185 wiring. The 90-91 harness is a bit different. You'll also have extra wires for the IC setup as compared to the standard 185 harness
The Mines ECU should have the same pinout as the RC, since they've basically remapped the stock ECU. The RC AFM has one more wire compared to the standard 185 ECU. This is just another ground (dedicated to the temp sensor instead of sharing the ground wire between them). -------------------- Scott
West Michigan |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 2:17 AM |