Wheel bearing Options

[Hawkins Corp]

How hard is it to get to the wheel bering on the rear tire on a st? (with drum breaks of course) and how long you think it would take to replace? and any special tools need?

Thanks, Brad

[playr158]

the front is not an assembly like the rear

here is the front (knuckle with spindle mounted)


and here is the backside


for the front you order
1) inner and outter wheel seals
2) bearing

then take your knuckle (or car) to a shop close by have them pull out the old bearing and seals from the knuckle and press the new ones back in..your ready to roll

[Bitter]

the front is not an assembly like the rear

here is the front (knuckle with spindle mounted)


and here is the backside


for the front you order
1) inner and outter wheel seals
2) bearing

then take your knuckle (or car) to a shop close by have them pull out the old bearing and seals from the knuckle and press the new ones back in..your ready to roll

WOW that looks almost identical (it may even be) to my front knuckles but with a different hub.

im doing my front wheel bearings tomorrow at school, i did my axles yesterday.