 Help Update: Speedo Still Not Working |
 Mar 15, 2006 - 1:50 AM
|
 
|
|
Enthusiast  Joined Jun 29, '03 Currently Offline Reputation: 0 (0%)  |
We just completed swapping her all the hoses and stuff are connected.... I think..
This is from a 6gc with a completed swap... I did a auto to manual swap, does it matter if I connect the park neutral thing in order to start the car? If so... where is that wire at? When I turn the key, everything sounds normal... but the starter doesn't turn over... Please help... I'm thinking it's something with the wiring. I'm stumped. This post has been edited by Chanh55: Mar 22, 2006 - 5:23 PM |
 |
Replies
|
Apr 26, 2006 - 9:32 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
QUOTE(WannabeGT4 @ Apr 26, 2006 - 10:31 PM) [snapback]426994[/snapback] QUOTE(95celgt @ Apr 26, 2006 - 7:14 PM) [snapback]426920[/snapback] The car has become undrivable from all the smoke in the cabin, which made me ill driving it 5 miles today, so im gonna fix this today... Thanks for all the input I have taken my time to read all of the threads on mr2oc and this is what I picked up: The oil flowing out through the breather is part of blow-by, putting it into the intake will make the intake, turbo, and IC piping coated with oil, so I will need to clean it from time to time. Playr already mentioned it but that is exactly what a catch can is for. QUOTE(95celgt @ Apr 26, 2006 - 7:14 PM) [snapback]426920[/snapback] So best meathod IMO would be to put it into the exhaust, but I will end up plumbing it into the intake regardless for time's sake. I've never heard of plumbing your pcv to your exhaust before. Having hot expanding gases traveling into your crankcase is counter productive considering the nature of the PCV. actually having your PCV routed very close to the end of your exhaust out by the muffler is a great way to have it done...there is a full thing over on mr2oc about it...  look the PCV routinghttp://www.mr2oc.com/showthread.php?t=1453...ght=PCV+exhaust <----part1 This post has been edited by playr158: Apr 26, 2006 - 9:38 PM |
Posts in this topic
Chanh55 Help Update: Speedo Still Not Working Mar 15, 2006 - 1:50 AM
lagos you need to wire in, or bypass the clutch start sw... Mar 15, 2006 - 1:57 AM Chanh55 Do you know where that is? I can't find it. Mar 15, 2006 - 2:10 AM Consynx follow the started to the ignition? Mar 15, 2006 - 2:19 AM Chanh55 Eggman... Lagos.... Doc... Help! ahhh Mar 15, 2006 - 3:06 AM WannabeGT4 Check fuses "60A MAIN", "30A AM2... Mar 15, 2006 - 12:16 PM x_itchy_b_x ok check this also (this was my promblem)
where th... Mar 15, 2006 - 12:22 PM
Chanh55 QUOTE(x_itchy_b_x @ Mar 15, 2006 - 9... Mar 15, 2006 - 1:43 PM Rjb23 QUOTE(Chanh55 @ Mar 15, 2006 - 6:43 ... Mar 15, 2006 - 1:59 PM WannabeGT4 QUOTE(Chanh55 @ Mar 15, 2006 - 12:43... Mar 15, 2006 - 2:04 PM x_itchy_b_x anything yet? Mar 15, 2006 - 1:24 PM Chanh55 RIB, can you do me a huge favor and take pic of wh... Mar 15, 2006 - 2:12 PM Chanh55 I got the fuse out... wtf it's bolted down fro... Mar 15, 2006 - 2:56 PM Rjb23 Chanh, I can look later and tell you. But the Circ... Mar 15, 2006 - 4:14 PM Chanh55 Hey RJB... I'm gonna need a pic of how that wa... Mar 15, 2006 - 5:10 PM Rjb23 I'll see what I can do. What you want to do is... Mar 15, 2006 - 5:47 PM DG_Performance I am still not following your problem?
does the ca... Mar 15, 2006 - 7:19 PM Rjb23 Sorry I couldn't get a good enough picture to ... Mar 16, 2006 - 1:05 PM Chanh55 QUOTE(Rjb23 @ Mar 16, 2006 - 10:05 A... Mar 16, 2006 - 1:59 PM tomazws I don't think I'm any help lol, but I hope... Mar 16, 2006 - 2:13 PM Dr_Tweak Chan, give me a call if you like. 802-334-6553.
-... Mar 16, 2006 - 2:21 PM WannabeGT4 There is a less complicated way to accomplish the ... Mar 16, 2006 - 2:43 PM Rjb23 I don't think there is a black and black yello... Mar 16, 2006 - 3:09 PM WannabeGT4 Wirings diagrams for both the 90-91 and 92-93 3SGT... Mar 16, 2006 - 3:12 PM Rjb23 Yea me too but if I remember right I didn't ha... Mar 16, 2006 - 3:15 PM WannabeGT4 Auto and Manual COR wiring should be the same... e... Mar 16, 2006 - 3:31 PM Chanh55 I gave doc a call, I will give his suggestion a tr... Mar 16, 2006 - 5:44 PM Chanh55 Bump, please see page 1. Mar 16, 2006 - 11:08 PM WannabeGT4 QUOTE(Rjb23 @ Mar 16, 2006 - 2:15 PM... Mar 17, 2006 - 12:09 PM Dr_Tweak Yes, but the black wire goes to a different place ... Mar 17, 2006 - 6:22 PM WannabeGT4 QUOTE(Dr_Tweak @ Mar 17, 2006 - 5:22... Mar 18, 2006 - 7:06 PM Chanh55 My speedometer isn't working. I checked all th... Mar 20, 2006 - 5:35 PM Dr_Tweak Here you go Chan:
That's what we talked abo... Mar 20, 2006 - 10:25 PM DG_Performance The easy way to do it.... i am guessing you will n... Mar 21, 2006 - 1:14 AM Chanh55 QUOTE(DG_Performance @ Mar 20, 2006 - 10... Mar 21, 2006 - 1:16 AM DG_Performance You can kiss me later....
NOT!
II1 is one of t... Mar 21, 2006 - 1:17 AM Chanh55 QUOTE(DG_Performance @ Mar 20, 2006 - 10... Mar 21, 2006 - 1:26 AM madmods Chann, you made this comment on another post:
It... Mar 21, 2006 - 6:50 PM Chanh55 Well...
1. I drove to the mufflerr shop with a b... Mar 21, 2006 - 7:05 PM madmods QUOTE(Chanh55 @ Mar 22, 2006 - 12:05... Mar 22, 2006 - 12:45 AM Chanh55 I haven't really pushed her yet... but when I ... Mar 22, 2006 - 12:59 AM Chanh55 Speedometer still not working.
Can someone give ... Mar 22, 2006 - 4:14 PM Chanh55 I've pushed her... and to answer your question... Mar 22, 2006 - 6:32 PM 95celgt bump!, trying to fix speed sensor!, idles ... Apr 17, 2006 - 12:34 AM lagos are you the new owner or something?
you should b... Apr 17, 2006 - 1:00 AM 95celgt i replaced them with iridiums because thats what w... Apr 17, 2006 - 10:25 AM playr158 the iridium tip is too small for turbo cars really... Apr 17, 2006 - 10:57 AM 95celgt i just read that the iriduim plugs(IK20) come pre-... Apr 17, 2006 - 10:59 AM WannabeGT4 Might as well give it a try. It can't hurt.
A... Apr 17, 2006 - 11:20 AM 95celgt yea, but damn, even now it runs awesome aside from... Apr 17, 2006 - 11:23 AM Chanh55 Pictures! Apr 17, 2006 - 11:40 AM playr158 NGK BKR6E are very easy to find at nearly any auto... Apr 17, 2006 - 1:54 PM 95celgt well i fixed the misfiring, a wire that goes to th... Apr 17, 2006 - 5:05 PM playr158 gap should be
.8mm or .031in Apr 17, 2006 - 6:47 PM Rjb23 QUOTE(playr158 @ Apr 17, 2006 - 11:4... Apr 25, 2006 - 12:52 PM 95celgt hi guys, i put in normal plugs, started...fan fine... Apr 24, 2006 - 5:53 PM playr158 how are you advancing your timing and playing with... Apr 24, 2006 - 7:05 PM 95celgt QUOTE(playr158 @ Apr 24, 2006 - 7:05... Apr 24, 2006 - 7:32 PM lagos QUOTE(95celgt @ Apr 24, 2006 - 8:32 ... Apr 24, 2006 - 9:14 PM 95celgt DAMMIT!!! It runs soooo much better at... Apr 24, 2006 - 10:08 PM lagos you probably have a boost leak or something
runni... Apr 24, 2006 - 11:33 PM 95celgt QUOTE(lagos @ Apr 24, 2006 - 11:33 P... Apr 25, 2006 - 12:11 AM LewFX what did you do to the beast??? Apr 24, 2006 - 11:36 PM 95celgt Cool, I noticed the Breather filter attatched to t... Apr 25, 2006 - 10:20 PM lagos i still dont understand why people use breather fi... Apr 25, 2006 - 10:25 PM Rjb23 QUOTE(lagos @ Apr 26, 2006 - 3:25 AM... Apr 26, 2006 - 12:53 PM 95celgt it came like that lagos:P
but even then, it shoul... Apr 25, 2006 - 10:31 PM lagos QUOTE(95celgt @ Apr 25, 2006 - 11:31... Apr 26, 2006 - 3:00 AM playr158 QUOTE(Rjb23 @ Apr 25, 2006 - 1:52 PM... Apr 26, 2006 - 2:27 PM lagos QUOTE(Rjb23 @ Apr 26, 2006 - 1:53 PM... Apr 26, 2006 - 2:35 PM Rjb23 I don't have crappy idle or vac, I run 20 vac ... Apr 26, 2006 - 3:17 PM playr158 better yet.....get a catch can Apr 26, 2006 - 3:29 PM Rjb23 QUOTE(playr158 @ Apr 26, 2006 - 8:29... Apr 26, 2006 - 4:11 PM Doge I would listen to Lagos. Tee off your intake line... Apr 26, 2006 - 6:20 PM Rjb23 QUOTE(Doge @ Apr 26, 2006 - 11:20 PM... Apr 27, 2006 - 9:44 AM 95celgt The car has become undrivable from all the smoke i... Apr 26, 2006 - 7:14 PM WannabeGT4 QUOTE(95celgt @ Apr 26, 2006 - 7:14 ... Apr 26, 2006 - 9:31 PM phattyduck QUOTE(WannabeGT4 @ Apr 26, 2006 - 7... Apr 27, 2006 - 5:16 PM WannabeGT4 Isn't a catch can a whole lot easier in our ca... Apr 26, 2006 - 9:39 PM lagos or you could just hook it up the way toyota did it... Apr 26, 2006 - 9:40 PM 95celgt LOL @ Lagos
I finished running a hose to the Inta... Apr 26, 2006 - 9:50 PM Doge The crankcase is not a vacuum... but the intake is... Apr 27, 2006 - 11:30 AM Rjb23 QUOTE(Doge @ Apr 27, 2006 - 4:30 PM)... Apr 27, 2006 - 3:13 PM lagos QUOTE(Doge @ Apr 27, 2006 - 12:30 PM... Apr 27, 2006 - 11:40 AM Doge What's your point? The PCV needs the vacuum o... Apr 27, 2006 - 3:47 PM lagos QUOTE(Rjb23 @ Apr 27, 2006 - 4:13 PM... Apr 27, 2006 - 4:14 PM 95celgt guys, some help on a problem?
Car runs crappy whe... May 2, 2006 - 10:46 PM lagos can you tell us what "crappy" means? May 2, 2006 - 11:02 PM 95celgt the extreme case of misfire when I give it throttl... May 2, 2006 - 11:15 PM lagos did you see what happend to my car on the dyno whe... May 2, 2006 - 11:47 PM 95celgt i put in the ngk's, and it ran crappier than t... May 3, 2006 - 12:27 AM Consynx i run the 6097's by ngk, iunno what heat range... May 3, 2006 - 12:58 AM 95celgt mine are brk6e?
car misfires INCREDIBLY in vaccum... May 6, 2006 - 5:00 PM 95celgt any ideas? May 10, 2006 - 11:42 AM lagos have you checked for boost leaks? May 10, 2006 - 11:44 AM 95celgt car runs good for days, some times it runs bad, i ... Jun 30, 2006 - 1:49 AM 95celgt so i got bored today and decided to poke at the wi... Nov 16, 2007 - 12:21 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 22nd, 2025 - 2:15 PM |