Def's Dyno Runs, A learning experience Options

[Defgeph]

Hey guys,

I went to the dyno this weekend to find out what numbers I'm putting down. I came out very impressed. I was thinking along the lines of 230 hp to the wheels.

New Dyno Video 10MB

At 17.5 PSI, I put down 246HP and 261 TQ. Just insane.

Look at one of my run files below. I am still having trouble tuning my boost controller. You'll notice that after 4,000 rpm I have very strange spikes in boost. The theroy we have is, the controller is opening and then closing my waste gate door over and over after 4K. In the next few weeks I'll be tweeking the profec to run a constant number, then go back to the dyno. I believe I can squeeze out a couple more horses once this thing is set properly.




If you have any suggestions, I'm more than happy to hear them.

I'd like to again thank Manny, Jenn, and Dustin. With out them I would'nt be sharing this information with you. Again guys thank you, anything you need I'm there.

6GC. Without this place, I wouldnt have what I have. A thank you goes out to you as well.


Thanks ,
DEF

[presure2]

actually, art, thats pretty typical of what you see outta a usdm 3sgte.
that specific dyno chart is one that is used all over mr2oc, and was given to me by ken blake, as refrence for my runs.