![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Apr 25, '06 From berwick Currently Offline Reputation: 0 (0%) ![]() |
i have a st 6g and i was wondering if i just do the 4agze swap do i need the whole front clip? or can i just do the basic engine tranny ecu and wiring purchase?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined May 24, '03 From Milton, Delaware Currently Offline Reputation: 0 (0%) ![]() |
The 4agze and lsd tranny will need some fabrication on a couple of the mounts to get it in the car, but its pretty easy to do (I did it and thats saying something) U'll have to figure out axles, the passenger side fits fine it could stand to be a little longer actually but for now it works, the driver side needs to be shortened i believe, i'm not entirely positive i bought mine off of John (mynzeyes) after he had allready gotten whatever done.
In my honest opinion, buy the whole clip. Even if you decide to go straight to standalone there is lots of stuff you can sell off the clip to recoup some cash, i've seen the jdm engine harness sell for 500 bucks on ebay before, same as the axles only a couple weeks ago. The tranny that comes with the gze is great because its lsd (if you buy the ae101) and is pretty much bullet proof. If you have any questions about the gze swap feel free to pm me, i'll try to help w/ what I can, for the moment I believe i'm the only 6th gen w/ the motor running in the car. That's all i have to say about that.... -FAQ -------------------- AIM : FAQdaWorld
|
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 2:25 PM |