 YES 3sgte with a 5s stock tranny., some thing is broken. woot. |
 May 7, 2006 - 11:31 PM
|
 
|
 Enthusiast  Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%)  |
well driving home on the mass pike i just cruising at 70mph in 5th gear at 3.5k rpm. when all of a sudden my RPM raises without me even touching the gas and now i down shift like wtf. and yeah every gear my car doesnt move. the clutch doesnt sound like it engageing at all. woo to pulling the motor again to find the problem.
first ill check thing like the slave cylinder ect. but im so confused cause i dont hear any moving parts when i shif an let the clutch out. i cant feel anyhting in the pedal at all. /rant ps this sucks. im hoping my clutch setup is ok and that my flywheel bolt havent sheared off or worse. -------------------- |
 |
Replies
|
May 9, 2006 - 10:17 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
the 3sge was also sold in the 4th gen celica. not saying thats what jeff has, just that it might be something to look into, also.
if the insides of the jdm s54 were any different, wouldnt they change the model number of the trans? -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Posts in this topic
x_itchy_b_x YES 3sgte with a 5s stock tranny. May 7, 2006 - 11:31 PM
defgeph Check for fluid. Check the slave cylinder is worki... May 7, 2006 - 11:40 PM x_itchy_b_x fluid is full 2nd thing i checked for. yeah i plan... May 7, 2006 - 11:41 PM lagos well ... its a clutch issue for sure. nothing wron... May 7, 2006 - 11:45 PM x_itchy_b_x id agree with you but no bad sounds come from the ... May 7, 2006 - 11:48 PM lagos i know your problem !
and you owe me a milli... May 7, 2006 - 11:57 PM brianforster im not exactly an expert like some of these guys b... May 7, 2006 - 11:58 PM x_itchy_b_x no clue but i know no fluid is leeking my cv might... May 8, 2006 - 12:01 AM lagos QUOTE edit if his axles fell out wouldnt he be dri... May 8, 2006 - 12:04 AM bigal004321 Wouldnt it be more likely that the axle would brea... May 8, 2006 - 9:12 AM x_itchy_b_x well today i put the car up on jack stands and sta... May 8, 2006 - 2:19 PM lagos QUOTE3'in intercooler pipe
you mean, downpip... May 8, 2006 - 2:26 PM x_itchy_b_x well my tranny i do have slight problems with. cru... May 8, 2006 - 2:32 PM presure2 john, dont do the 3" piping.
with our length,... May 9, 2006 - 6:25 AM burneeed s54 not a good tranny for the 3sgte. Lots of peop... May 9, 2006 - 8:50 AM
presure2 QUOTE(burneeed @ May 9, 2006 - 9:50 ... May 9, 2006 - 11:34 AM lagos QUOTE(presure2 @ May 9, 2006 - 12:34... May 9, 2006 - 11:50 AM bufferdan Why pull the engine to replace the clutch or trann... May 9, 2006 - 12:44 PM lagos QUOTE(presure2 @ May 9, 2006 - 7:25 ... May 9, 2006 - 1:00 PM Supersprynt With reading the MR2 boards, the S54 tranny thats ... May 9, 2006 - 1:02 PM presure2 QUOTE(Supersprynt @ May 9, 2006 - 2... May 9, 2006 - 2:46 PM BBoYRuGGeD QUOTE(Supersprynt @ May 9, 2006 - 6... May 9, 2006 - 3:16 PM Supersprynt Out of curiousity, did Jeff have to modify his axl... May 9, 2006 - 3:03 PM presure2 he just rebuilt them. May 9, 2006 - 3:08 PM Supersprynt QUOTEOriginally Posted by MISTER2
A241E = 5S-FE, 3... May 9, 2006 - 3:25 PM brianforster the s54 offered with the 3sge, for mr2s and the s5... May 9, 2006 - 4:37 PM defgeph My tranny came from a celica or curren, it's a... May 9, 2006 - 6:14 PM Aaagogo who rebuilt ur axle?
QUOTE(defgeph @ May 9, ... May 9, 2006 - 8:51 PM defgeph QUOTE(Aaagogo @ May 9, 2006 - 9:51 P... May 9, 2006 - 8:53 PM brianforster so then you have an s54 which is the same thing as... May 9, 2006 - 6:27 PM defgeph QUOTE(brianforster @ May 9, 2006 - 7... May 9, 2006 - 8:45 PM presure2 heres a screenshot from my EPC.
the 3sge tranny is... May 9, 2006 - 6:33 PM brianforster dude, is that a program that gets you part numbers... May 9, 2006 - 6:56 PM presure2 yea it is, it is the toyota distributed, electroni... May 9, 2006 - 7:04 PM lagos finally we get some soild info on what tranny that... May 9, 2006 - 7:12 PM x_itchy_b_x wait so im confused. if i want longer gears and a ... May 9, 2006 - 7:19 PM lagos QUOTE(x_itchy_b_x @ May 9, 2006 - 8... May 9, 2006 - 7:26 PM x_itchy_b_x wasnt there a 6speed tranny that people wanted to ... May 9, 2006 - 7:46 PM BBoYRuGGeD QUOTE(x_itchy_b_x @ May 10, 2006 - 12... May 9, 2006 - 7:51 PM lagos also.... i know some guys with the solara tranny. ... May 9, 2006 - 8:10 PM Supersprynt Jeff - I knew yours didnt come outta an MR2, just ... May 9, 2006 - 9:26 PM BBoYRuGGeD so the s54 that came with the 5sfe and the 3sge is... May 9, 2006 - 9:26 PM brianforster i wonder what the part number is for the 3sge celi... May 9, 2006 - 9:28 PM Batman722 QUOTE(brianforster @ May 9, 2006 - 10... May 9, 2006 - 9:32 PM Batman722 OK I have some info from looking at the EPC
st202... May 9, 2006 - 9:28 PM Supersprynt The E56 could be an auto tranny?
LSDs on what tra... May 9, 2006 - 9:32 PM brianforster for those interested i am downloading the toyota e... May 9, 2006 - 9:33 PM BBoYRuGGeD QUOTE(brianforster @ May 10, 2006 - 2... May 9, 2006 - 9:34 PM brianforster its 500 megs, and i think i need access to a track... May 9, 2006 - 9:42 PM Supersprynt Good stuff guys! May 9, 2006 - 9:57 PM brianforster we are talking about the interior differences of t... May 9, 2006 - 10:01 PM Batman722 OK here it is...pics.
top left you will see the p... May 9, 2006 - 10:02 PM brianforster batman, can you check the part numbers of the s54 ... May 9, 2006 - 10:05 PM Supersprynt If we knew Jeff's part #s we could probably fi... May 9, 2006 - 10:12 PM Batman722 QUOTE(Supersprynt @ May 9, 2006 - 11... May 9, 2006 - 10:15 PM brianforster from mannys post earlier in the thread, jeffs part... May 9, 2006 - 10:17 PM brianforster QUOTE(presure2 @ May 9, 2006 - 11:33... May 9, 2006 - 10:21 PM Batman722 QUOTE(brianforster @ May 9, 2006 - 11... May 9, 2006 - 10:42 PM Supersprynt QUOTE(brianforster @ May 9, 2006 - 11... May 9, 2006 - 10:25 PM lagos lets not forget that the "s54" IS a pa... May 9, 2006 - 10:26 PM brianforster this is an excellent topic! May 9, 2006 - 10:40 PM brianforster ok then can you post part numbers for the 5sfe s54... May 9, 2006 - 10:53 PM defgeph I wish I had some numbers on those axles.
We sho... May 9, 2006 - 11:20 PM burneeed theres so much work involved in converting the 93 ... May 9, 2006 - 11:48 PM Batman722 we need to remember that Jeff's tranny is not ... May 9, 2006 - 11:54 PM defgeph QUOTE(Batman722 @ May 10, 2006 - 12... May 9, 2006 - 11:55 PM Supersprynt Are you sure about that or speculating?
I would a... May 10, 2006 - 12:00 AM Batman722 I wish I could...I do not have Curren part #s
I ... May 10, 2006 - 12:01 AM brianforster guys, i read this on the FAQ for the EPC from the ... May 10, 2006 - 12:10 AM defgeph I would think that as well. The trannys would be t... May 10, 2006 - 12:11 AM brianforster not sure how long this will last but heres where i... May 10, 2006 - 12:12 AM Batman722 QUOTE(brianforster @ May 10, 2006 - 1... May 10, 2006 - 12:51 AM playr158 http://www.mr2oc.com/showthread.php?t=174139
mayb... May 10, 2006 - 12:29 AM Supersprynt As far as I know there was no LSD for the S54 tran... May 10, 2006 - 12:32 AM playr158 wouldn't there be a number on jeff's trann... May 10, 2006 - 12:34 AM brianforster QUOTE(Batman722 @ May 10, 2006 - 5:5... May 10, 2006 - 1:25 AM lagos QUOTE(defgeph @ May 10, 2006 - 1:11 ... May 10, 2006 - 1:41 AM Supersprynt QUOTE(playr158 @ May 10, 2006 - 1:34... May 10, 2006 - 7:46 AM defgeph Explain why my passenger side tire breaks loose fi... May 10, 2006 - 10:06 AM Supersprynt We're deviating from my original hypothesis. T... May 10, 2006 - 10:25 AM brianforster i dont think the insides of the 3sgtes are differe... May 10, 2006 - 11:08 AM Supersprynt This is a weird coincidence. This was just posted ... May 10, 2006 - 11:32 AM playr158 QUOTE(Supersprynt @ May 10, 2006 - 12... May 10, 2006 - 11:44 AM scothaniel The Tranny I sold Dustin (and is now owned by defg... May 10, 2006 - 11:46 AM scothaniel Also, if anyone wants the ISO's for the JDM 97... May 10, 2006 - 11:57 AM lagos an easy way to verify the gear ratio would be to h... May 10, 2006 - 12:07 PM defgeph QUOTE(lagos @ May 10, 2006 - 1:07 PM... May 10, 2006 - 3:47 PM Supersprynt Good stuff Scothaniel.
So it looks that the E56 i... May 10, 2006 - 12:13 PM brianforster will the e56 bolt on to our setups easier than the... May 10, 2006 - 12:15 PM lagos QUOTE(brianforster @ May 10, 2006 - 1... May 10, 2006 - 12:20 PM brianforster in that other thread in the n/a forum, someone has... May 10, 2006 - 12:23 PM Belhan QUOTE(brianforster @ May 10, 2006 - 5... May 10, 2006 - 12:35 PM scothaniel QUOTEwill the e56 bolt on to our setups easier tha... May 10, 2006 - 1:44 PM scothaniel QUOTE in that other thread in the n/a forum, someo... May 10, 2006 - 2:07 PM burneeed wow that could be a great axle solution if those a... May 11, 2006 - 10:51 AM playr158 part # and a dealership could do it May 11, 2006 - 11:34 AM Belhan oh ****... used S54 is 600$ and used E56 is 1... May 11, 2006 - 1:02 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 28th, 2025 - 7:55 AM |