![]() |
![]() |
![]() |
|
![]() Enthusiast Joined May 9, '06 From Japan Currently Offline Reputation: 0 (0%) ![]() |
After many, many weeks of researching. I found that TRD did make limited edition Cams that is VVT-I compatible. Unfortunatly they are not being made anymore and finding a new set is impossible, heck....i cant even find a used set.
Anyway, on to the question, does anyone know what TRD offered for Cam durations and lifts for the 98-99 Beams Redtop? Finding information in english is becoming a pain. -------------------- 1991 Toyota MR2 (Beams Redtop)
1991 Toyota MR2 (3SGTE) www.Beams-RedTop.com |
![]() |
![]() |
|
![]() Enthusiast Joined May 9, '06 From Japan Currently Offline Reputation: 0 (0%) ![]() |
according to the link above, those cams are for the BlackTop Dual VVT-I. Will the Intake Cam for the Blacktop fit the Redtop with no Modifications? Also, will the exhaust Cam fit in the redtop, i know its not dual VVT-I, but will it run fine even with a VVT-I cam without an exhaust VVT-I sensor thing (or whatever runs it).
I will be using the APEXI EMS from bathboy er whatever they are called, Which cam duration would you recommend that will also allow to keep my car as a daily driver with no rough idle? So can these still be ordered from TRD? The TRD Tama is about a 20 minute drive for me. -------------------- 1991 Toyota MR2 (Beams Redtop)
1991 Toyota MR2 (3SGTE) www.Beams-RedTop.com |
![]() ![]() |
Lo-Fi Version | Time is now: July 25th, 2025 - 8:10 AM |