Could someone post a Exlploded view of the front DS Spindle/AXLE Options

[Celi94bk]

I found a spinde at a junk yard about 15min away. I need a exploded view of the drivers side front spindle and axle, Drivetrain. If some one has them that would be awesome if you could post them. I gong to take this apart tomorrow and a diagram would be a great help. Thanks in advance I do have one question, What size is the Largest socket needed to get this done?

This post has been edited by Celi94bk: May 10, 2006 - 4:29 PM

[Celi94bk]

"It's a 30mm nut. A 1-1/4" socket will work too, and is more commonly available."

This is for the center drive shaft bolt. No one corrected me on this I was running around looking for a 33mm and no one had one... lol

Anyways I did not want to mess any one up. I need to get a 30mm or a 1-1/4 socket back out to the store.

I have the nuckle it is in ruff shape so im going to try and clean it up a bit and I will let you know how it went..