 Pressure Plate and Flywheel Problem, They Don't Match Up |
 May 13, 2006 - 1:04 AM
|
 
|
|
Enthusiast  Joined Sep 26, '04 From Sacramento, California Currently Offline Reputation: 4 (100%)  |
Today, I took out my Fidanza flywheel and my Exedy OEM replacement pressure plate to look at them. I wanted to see how the pressure plate would look mounted on the flywheel, so I tried to fit the studs on the flywheel through the holes on the pressure plate. I tried many times and rotated the pressure plate but the two parts just won't go together. The holes and the studs are off by just a hair, so I just wanted to know if this is a big problem and I should be worried or if it is a minor problem and it can be easily fixed. Thanks
|
 |
Replies
|
May 13, 2006 - 11:22 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE(TRD-ST204 @ May 13, 2006 - 2:04 AM) [snapback]433479[/snapback] Today, I took out my Fidanza flywheel and my Exedy OEM replacement pressure plate to look at them. I wanted to see how the pressure plate would look mounted on the flywheel, so I tried to fit the studs on the flywheel through the holes on the pressure plate. I tried many times and rotated the pressure plate but the two parts just won't go together. The holes and the studs are off by just a hair, so I just wanted to know if this is a big problem and I should be worried or if it is a minor problem and it can be easily fixed. Thanks sounds like you may have gotten the wrong parts somewhere along the line... -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
May 15, 2006 - 6:41 PM
|
|
|
Enthusiast Joined Sep 26, '04 From Sacramento, California Currently Offline Reputation: 4 (100%) |
QUOTE sounds like you may have gotten the wrong parts somewhere along the line... No, I went back to check the part numbers for both parts and made sure it was for a 2.2L 5SFE. The thing is that they aren't off by even a millimeter, just by a HAIR! So can the pressure plate hole be sanded just a tiny bit or will that probably cause a problem. |
Posts in this topic
TRD-ST204 Pressure Plate and Flywheel Problem May 13, 2006 - 1:04 AM
GT4WRC If the holes aren't lined up correctly, then t... May 15, 2006 - 6:54 PM TRD-ST204 QUOTE(GT4WRC @ May 15, 2006 - 11:54 ... May 16, 2006 - 6:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 25th, 2025 - 6:43 PM |