Removing rear interior panel Options

[Mr_Chicken]

Hi guys,

I am stuck with the removal of the rear side panel. I couldn't get anything out of its fitting. Can anyone tell me how to go about removing these panels?

thx

[97lestyousay]

This is from another topic but u get the Idea. Thanks to Batman722

this is a direct add on right? like no wire cutting or anything?

These replace your current tails and the wiring, they are plug and play 100%.

just in case anyone doesn't know, I will explain how to put these on your car - with a pic

1 unbolt the old tails (3 10mm nuts - yellow arrows)
2 take off your inner hatch plastic (2 pins at upper corners (red arrow) and 3 plastic screw things on the bottom edge)



3 unplug you old tail light harnesses
4 remove the tails and wire harnesses completely
5 put new JDM tail in and plug in new harnesses.
6 put rear plastic back on

it seems a lot harder than it actaully is. Once you get your new JDM tails in your hands you will understand everything. It is super easy and can be done in about 10 minutes.