![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%) ![]() |
Hey guys I don't have my A/C hooked up and I don't get a cel, but if I have the diagnosis pins jumped when the car is running and I give it any gas I get a code 51. Which is IDL No "IDL" or A/C signal during testing Check TPS, A/C switch, Accelerator cable. I don't have my A/C hooked up or the A/C throttle up switch hooked up, will this throw that code?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%) ![]() |
Nope the throttle cable being to tight is definatly not the problem. It is actually a little loose and there is a little slack in it. The only time I get the code is when I rev, and its doesn't even show up unless I rev the engine with the diagnostic pins jumped.
|
![]() ![]() |
Lo-Fi Version | Time is now: July 25th, 2025 - 3:20 PM |