a/f guage, sorry aboot this Options

[afroman]

i bought and tried to install the autometer a/f guage i got it wired in and if it is not connected to o2 sensor then the far right green led is on if it is connected then the far left red led is on when i am hard on the gas the far left led gets brighter i can not get it to work properly. if i turn on my blinker the far left red led flashes with the blinker also when i do this my volts guage bounces with the blinker i would be so greatful for any help u could give me
i have read the other posts aboot this topic and still can not figure it out the only thing i can figure is that i have the wrong wire coming off the o2 sensor i have spliced into both and neither work

This post has been edited by afroman: Jul 3, 2003 - 3:33 AM

[edo17982]

so, if u connected it between the sensor and the connector, the wire you have to splice is the BLUE one. if you've done it after the connector the wire you've to splice is the white one

This post has been edited by edo17982: Jul 3, 2003 - 5:14 AM