Jul 3, 2003 - 12:46 AM
|
|
|
Enthusiast Joined Jul 3, '03 From Phoenix, AZ Currently Offline Reputation: 0 (0%) |
Just picked up a 95 GT Convertible, and the stereo wiring harness is a single 15p connector, not the usual 2 connectors like in other toyotas. I'd like to convert the two connector style and have the parts to do so, because I can't find a conversion harness for the 15p connector at local stereo/electronics shops.
Can anyone direct me to which wires go where? I noticed many are the same colors without stripes, so I'm confused and can't do it on my wits anyone. Thanks, John |
![]() |
Jul 3, 2003 - 5:50 PM
|
|
|
Enthusiast ![]() ![]() Joined Dec 19, '02 From West of Atlanta Currently Offline Reputation: 1 (100%) |
I posted this a while back. At the bottom is a like for the scosche TA02 harness kit for $5. It comes with two plugs but you only use one.
Power Connections Constant 12+ Blue/Yellow Switched 12+ Gray Ground Brown Power Antenna Black/Red and Pink/Blue connect both wires to the radio's remote wire. Illumination Green Speaker Connections Front/Right + Light Green Front/Right - Blue Front / Left + Pink Front / Left - Purple Rear / Right + Red Rear / Right - White Rear / Left + Black Rear / Left - Yellow Please check all of the wires before you make a connection. I am pretty sure these are the right but it never hurts to double check. www.sounddomain.com/shop/item.pl?sku=SCOTA02B&vq_id=none |
entropic Stereo wiring diagram for 95 GT Conv Jul 3, 2003 - 12:46 AM
Matthew in my 98 GT Hatch I have the premium factory syste... Jul 3, 2003 - 2:24 AM
entropic I found out that the typical 2 connector wiring pl... Jul 3, 2003 - 2:37 AM![]() ![]() |
| Lo-Fi Version | Time is now: March 31st, 2026 - 8:26 PM |