![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Apr 22, '04 From illinois Currently Offline Reputation: 0 (0%) ![]() |
Here's the engine code i have "V0928TDY" But i can't find anything on the internet, so i was wondering if there is an expert out there that might know codes like this, or a friend maybe.
Thanks ps. this is a 350 with a rochester carb. Other than that, i don't know anything else about it, what kind of heads, 2 bolt or 4 bolt, etc. etc. (the engine isn't mine, that's why i don't know anything about it, but if it turns out to be a nice engine according to the code, then it will be mine. Thanks) -------------------- ![]() The most important lesson I learned from Karate-Dō Kyōshan – “You can not be what you do not believe you are” |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 7, '03 Currently Offline Reputation: 55 (100%) ![]() |
I'll check the # tomorrow.
A pic would tell the heads. 194 or 202. From the front. 4 or 2 barrel Rotten chester? Actually its a good carb, the secondarys are unreal if they open right. You can almost see the gas gauge move if it works good. This post has been edited by 97lestyousay: May 29, 2006 - 10:53 PM -------------------- JDM guy made me do it.
|
![]() ![]() |
Lo-Fi Version | Time is now: June 24th, 2025 - 2:53 PM |