 Any RC Modelers out there? |
 May 23, 2006 - 1:44 AM
|
 
|
 Enthusiast  Joined Mar 29, '06 From Hull, UK Currently Offline Reputation: 0 (0%)  |
OK, I have plans for a piece of plastic (6"x6") thats either hinged at the top or the bottom, and I want to be able to raise or lower it at the flick of a switch.
I'm not an RC'er but I was wondering if something as simple as a servo would do the job, or maybe just a motor and a chain and sprocket? If I use the servo, what else would I need? (i.e. some sort of controller?) Any help would be appreciated. Dan This post has been edited by vsideboy: May 23, 2006 - 1:45 AM |
 |
Replies
|
May 30, 2006 - 1:42 AM
|
|
|
Enthusiast Joined Mar 29, '06 From Hull, UK Currently Offline Reputation: 0 (0%) |
cheers guys.
Don't suppose you'd know how I could wire that would you? just put a micro switch in the +ve line and that would cut it out when the arm presses it? Although I would need on for both positions, so it might be a pain to switch the +ve -ve around each time? This post has been edited by vsideboy: May 30, 2006 - 4:42 AM |
Posts in this topic
vsideboy Any RC Modelers out there? May 23, 2006 - 1:44 AM
WannabeGT4 It all depends on what you want to do. Servos are ... May 23, 2006 - 10:04 AM dlx742 what exactly are you trying to do...?
and if you ... May 23, 2006 - 9:12 PM celicasteve a servo will do. there is two power wires, one of ... May 23, 2006 - 9:15 PM Cutrara My bet is he's using it for a license plate May 23, 2006 - 9:22 PM
vsideboy QUOTE(Cutrara @ May 24, 2006 - 3:22 ... May 24, 2006 - 1:41 AM Cutrara Neat-o May 24, 2006 - 9:51 PM vsideboy ok, just tried a servo, but they need a pulsed sup... May 26, 2006 - 8:03 AM WannabeGT4 QUOTE(vsideboy @ May 26, 2006 - 8:03... May 26, 2006 - 11:51 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 19th, 2026 - 10:27 PM |