![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) ![]() |
I called Spec and ordered my clutch kit for the swap. They actually have a part number now for this set-up, the information is as follows:
Spec's tech phone number: 1-205-491-8581 I talked with Justin, who helped me out a ton, great guy to deal with. his extension is 108 The part number for the clutch kit is: ST6225S The SECOND (2) in that part number is the number to reference what stage clutch you would like. I chose a stage two clutch, which i was told will hold 400 ft/lbs of torque. If you wanted a stage 3 clutch the number would be as follows: ST6235S or a stage 1 (not recommended if you plan to add any power to the 3sgte) would be: ST6215S etc. etc. For reference this is what Lagos put together: You need the 5fse - disk 5sfe - throwout bearing 5sfe - alignment tool 3sgte - pressure plate 3sgte - flywheel The clutch kit includes all BUT the flywheel. EDIT: The clutch kit they sell is basically a kit for the 3sgte that will bolt onto the 5sfe Tranny. It is the 3s disk with the 5s spline count ![]() For a ballpark figure, i paid 389$ for the stage two clutch kit and after shipping a total of 413$ Hope this helps future swappers! ![]() This post has been edited by jcbass7: Jun 7, 2006 - 2:55 PM |
![]() |
![]() |
|
Enthusiast Joined Jun 7, '06 From Birmingham, AL Currently Offline Reputation: 0 (0%) ![]() |
His disk is actually on the way back to him. It left here on the 6th. We got it fixed for him.
-------------------- Justin Ables
2490 Five Star Parkway Bessemer, AL 35022 1.800.828.4379 Ext 108 justin@specclutch.com www.specclutch.com |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
QUOTE(SPEC01 @ Jun 8, 2006 - 8:21 AM) [snapback]442521[/snapback] His disk is actually on the way back to him. It left here on the 6th. We got it fixed for him. AWESOME. thanks for the update. im sure john will be happy to get it back up and running! ![]() as a sidenote, do you make a lightend flywheel for the 5sfe? cost? if so, could you possibly post a pic or 2? (if you need it hosted, PM the pic to me, ill host it) also, can you give me your recommendation on a setup for my car, its a 94 GT (5sfe) thats turboed, im putting ~275ft lbs to the wheels, and about 235whp, the goal for the car is 250whp. im looking for the lightest pedal feel i can get, while still holding the power of course. ![]() -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: July 26th, 2025 - 10:02 AM |