FS: 94-95 clear turns! || lenses or fully made!, Clear sidemarker lenses too! Options

[snapshotgt]

note: I'll also do the the complete job, and make them fully! -- PM me for details!

Update on the clear sides: Selling clear side lenses, not fully making them. $15 shipped for just the lenses (instructions and paint pen not included). note: Limited amount, and will probably not be making more, so if you want a set...well, hurry! Seriously.

I’m selling pre-cut clear turn signal pieces for our 94/95 bumpers. I know from trying to make them in the past, it can be a pain if you do not have access to the proper tools -- like cracking them etc. So I’m here to help you!

I make these lenses from clear office plastic. The way I make them is by using a band saw to cut close to the measured shape, then, using a grinding wheel, I melt/sand down to the exact shape desired for or turn signals.

So here’s the deal:

PM me with any questions about fully making them!

Here are some pictures of what they will look like after installed!



On the car:









You'll notice no screw -- well, it is best to screw them in from the back so you decrease your chance of them leaking by a lot. -- That said, if you desire, you can put a screw in the front.

If you have any questions or comments please feel free to PM me, or hit me up on aim: snapshotgt

thanks,
snapshotgt

This post has been edited by snapshotgt: Sep 1, 2006 - 10:31 AM

[JFrost9]

just a thought, why not make them with clear materials, something of higher quality than the plastic office materials? something like acrylic or plexiglass? Not that what your offering isnt a great product, its just the material doesnt last long.

edit: oh and by the way, nice fogs =)

This post has been edited by JFrost9: Jun 16, 2006 - 3:32 PM

[snapshotgt]

just a thought, why not make them with clear materials, something of higher quality than the plastic office materials? something like acrylic or plexiglass? Not that what your offering isnt a great product, its just the material doesnt last long.

edit: oh and by the way, nice fogs =)

I have had unbelievably awesome results with this office plastic. My old ones were on for one year, and they looked great and clear the whole time -- that was with them also leaking due to a bad install job I did real quick. (they still look good...)

Reason i use office plastic:

The main reason is purely look. I love the way the office plastic displays the light -- basically the same face pattern as the OEM lenses. That said, I do not like the way the totally clear (i.e. plexiglass) turns look with using the 94/95 housing. I think it looks ugly. Our 94/95 housing are not meant to be seen in, so when using a totally clear material, it is just show-casing the ugly interior. Just as a note, i have also tried frosting the lenses on the plexiglass, did not come out well either. Also, imo the other plastics are harder to install.

Now, with everything said, if someone wants these made with "totally clear" lenses, PM me, and we can work things out!

~snap

This post has been edited by snapshotgt: Jun 16, 2006 - 5:11 PM