3sgte wiring question Might have it solved!, it found a home, need confirmation!!! Options

[jcbass7]

well after two days of an intense puzzle known as wiring.. i have all but one connecter identified and plugged in. It is at the driver side of the intake manifold and i cannot seem to locate the other place to hook it in. Im guessing its a sensor or something that i dont have but im not sure.. here are some pics:






ALSO: what do i do about this oxygen sensor ? it is the lower of the two on the Down pipe:



This post has been edited by jcbass7: Jun 30, 2006 - 2:08 PM

[jcbass7]

bump

anyone know what choices i have with the broken TVSV

it's holding up progress at the moment

Leave it unplugged for now... it'll give you an error code, but the motor will start just fine. Later, you can just replace it with a resistor to fool the ECU that the TVSV is still there and use a an aftermarket boost controller.

-Charlie

THANK YOU!

Thats the information i needed to hear! now i can drop the motor in.. well actually i can't i still don't know where that grey plug goes!