 Keep warping rotors, im really frustrated!, Getting warped for the 3rd time |
 Jun 4, 2006 - 6:58 AM
|
 
|
|
Enthusiast  Joined Dec 28, '05 From Norway Currently Offline Reputation: 0 (0%)  |
Ok, so having replaced my front discs for the third time I can notice that the rotors is being warped again. I have only driven 250 miles with my new set and I can now feel that they (or maybe just one of them) are slightly warped. I replaced the new discs with OEM toyota discs and EBC greenstuff pads. I have noticed that the right disc is much warmer that the left one. Ok, so I thought that the caliper is stuck somehow. I have overhauled all four calipers about 6 months ago. Today I took out the caliper and both sylinders, all seems fine and the slide without any prob. I can push them into the caliper body with just my fingers! I tried a testrun without no braking at all and I can say for sure that the right disk are warm (let's say about 115F), so the caliper are not retreating fully? Not working 100%? I have no more ideas, I really hope someone can help me. I am getting really frustrated
 Edit: Oh, I've been really careful when braking. This post has been edited by eliaz: Jun 4, 2006 - 7:01 AM --------------------  |
 |
Replies
|
Jun 20, 2006 - 1:02 PM
|
|
|
Enthusiast Joined Dec 28, '05 From Norway Currently Offline Reputation: 0 (0%) |
QUOTE did you do a happy dance? Not yet, I have to save step 9. I'll do one when the machanics have replaced hub and bearing. I'll even tape the dance for you, good enough?  Oh, btw thanks for all the help! -------------------- |
Posts in this topic
eliaz Keep warping rotors, im really frustrated! Jun 4, 2006 - 6:58 AM
vsideboy make sure the hub is entirely flat and clean when ... Jun 4, 2006 - 10:22 AM Bitter are your wheels torqued to the correct specs with ... Jun 4, 2006 - 10:39 AM eliaz I've cleaned the hub before installing the new... Jun 4, 2006 - 11:55 AM LewFX sounds like you got a bad wheel bearing causing th... Jun 4, 2006 - 12:46 PM eliaz How come the disc getting warm? Jun 4, 2006 - 1:50 PM celica101 Dude check your brake hoses, mine did the same thi... Jun 4, 2006 - 2:06 PM eliaz QUOTEDude check your brake hoses, mine did the sam... Jun 4, 2006 - 2:45 PM LewFX seems like a seized up or (locked) hub and bearing... Jun 4, 2006 - 4:30 PM eliaz Bleed them about a week ago when I checked the cal... Jun 4, 2006 - 4:39 PM soulshadow Stop drinking too much and quit dopping ! (im... Jun 4, 2006 - 5:51 PM celica101 yeah just the wheel well to the caliper Jun 4, 2006 - 8:38 PM purplegt4 QUOTE(soulshadow @ Jun 4, 2006 - 6:5... Jun 4, 2006 - 9:04 PM vsideboy I wouldn't step on them hard, I would just dri... Jun 5, 2006 - 2:05 AM eliaz QUOTEAll brakes and rotors will eventually become ... Jun 5, 2006 - 3:26 AM SinisterWhisper I can't say I am having all that much luck wit... Jun 5, 2006 - 9:19 AM eliaz Did you put copper grease on back of the pads? Hel... Jun 6, 2006 - 9:58 AM eliaz So I called Toyota today and they said they had so... Jun 8, 2006 - 11:15 AM bindertch Go performance. You know you want to. Also If you ... Jun 10, 2006 - 10:34 PM DomGT If you go with aftermarket brake lines please let ... Jun 13, 2006 - 5:45 PM eliaz Okay, I have talked to a couple mechanics and they... Jun 18, 2006 - 3:35 AM LewFX sounds like i was right about the hub and bearing.... Jun 18, 2006 - 8:43 AM eliaz QUOTEmr. suspension knows allot Lol!
Is i... Jun 19, 2006 - 10:10 AM LewFX most dealerships wont sell just a bearing without ... Jun 19, 2006 - 3:35 PM Bitter you can get timken bearings from autozone. thats ... Jun 19, 2006 - 4:29 PM eliaz Did the pencil trick on the rotor and hub, look wh... Jun 20, 2006 - 11:50 AM playr158 if you keep warping rotors....are you sure your no... Jun 20, 2006 - 11:58 AM LewFX looks almost like mine before i got it fixed, trim... Jun 20, 2006 - 12:57 PM cheeco one other quick check you can do is check pedal fr... Jun 20, 2006 - 8:02 PM soulshadow have u checked to make sure that your Rims are not... Jun 20, 2006 - 11:31 PM eliaz Rims not bent. I haven't checked the pedal fre... Jun 21, 2006 - 11:10 AM eliaz So today I have been really pissed of since i pick... Jun 30, 2006 - 3:39 PM WannabeGT4 If they broke your ABS sensor make them pay for it... Jun 30, 2006 - 3:53 PM eliaz They are not paying for it, they said that they ha... Jul 1, 2006 - 3:45 AM
cheeco QUOTE(eliaz @ Jul 1, 2006 - 3:45 AM)... Jul 2, 2006 - 7:23 AM LewFX the only thing with nooopi is their shipping is re... Jul 1, 2006 - 9:59 AM LewFX you always get them trimmed, find the cheapest pla... Jul 1, 2006 - 10:13 AM vsideboy I agree, if they broke it they pay! Jul 3, 2006 - 4:40 AM LewFX show them the removal process from a manual and ar... Jul 3, 2006 - 9:07 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 22nd, 2025 - 10:54 AM |