ever seen this before?, Apex'i Front Strut Bar Options

[azian_advanced]

i saw it online, it resembles closely to that of a Cusco strut bar

anyway, i was in absolute awe when i saw it.. thinking "whoa, never seen this before on a 6th gen"
it's not in the Parts Database, so i'm guessing it is now discontinued? or maybe atleast it's very rare.

here are some pics: (u can never get sick of pics..)








well, i just got it in earlier today, and because i haven't worked for 2 weeks straight due to an injury on my right leg, i had nothing else to do and i just HAD to install it!
you know how it is when you get a part you've been waiting to get... hehe



here it is installed:




unfortunately, the power steering reservoir is sort of in the way and now it's tilting slightly to the inside when the bar is in place.. i'm guessing it's located elsewhere on a gt-four. but let's just hope that the bar does it's job and doesn't push the reservoir any further during a hard turn or else i'll have a big problem.

also, since the bar is meant for an st205, it kinda bridges upward.. which makes the stock hood hard to close. but that's okay.... for now

[GT4WRC]

unfortunately, the power steering reservoir is sort of in the way and now it's tilting slightly to the inside when the bar is in place.. i'm guessing it's located elsewhere on a gt-four. but let's just hope that the bar does it's job and doesn't push the reservoir any further during a hard turn or else i'll have a big problem.

I find this quite worrying. Should you really be modding cars if you think that the brake fluid resevoir is where the power steering fluid goes?



PAS Fluid Reservoir
Brake Fluid Reservoir

Besides, forcing the brake reservoir over to one side means that it won't seat properly and that means a huge risk of leaks and even air getting into the system. That brace is obviously not meant to fiit your car. Simply bending (critical) parts out of the way is not the ideal solution to making things fit.

Gary