ever seen this before?, Apex'i Front Strut Bar Options

[azian_advanced]

i saw it online, it resembles closely to that of a Cusco strut bar

anyway, i was in absolute awe when i saw it.. thinking "whoa, never seen this before on a 6th gen"
it's not in the Parts Database, so i'm guessing it is now discontinued? or maybe atleast it's very rare.

here are some pics: (u can never get sick of pics..)








well, i just got it in earlier today, and because i haven't worked for 2 weeks straight due to an injury on my right leg, i had nothing else to do and i just HAD to install it!
you know how it is when you get a part you've been waiting to get... hehe



here it is installed:




unfortunately, the power steering reservoir is sort of in the way and now it's tilting slightly to the inside when the bar is in place.. i'm guessing it's located elsewhere on a gt-four. but let's just hope that the bar does it's job and doesn't push the reservoir any further during a hard turn or else i'll have a big problem.

also, since the bar is meant for an st205, it kinda bridges upward.. which makes the stock hood hard to close. but that's okay.... for now

[azian_advanced]

woops... my bad. i didn't even read what it said on the plastic before making the assumption that it was the power steering reservoir.
thanks for clearing that up.. all i know is it's some kinda reservoir..
and Gary you're right, critical parts shouldn't be risked in order to make things fit..
so i think i'll put a couple washers beneath the strut bar to lift it a little? anybody want to make a suggestion to this?

it's just touching it but not bent over completely.. it's fine as it is now but if it flexes inwards by more than an inch, then maybe i'll have some problems.. but i truly doubt that'll happen.