 Window Adjustment, How do I line the window up? |
 Jun 26, 2006 - 3:45 AM
|
 
|
 Enthusiast  Joined Mar 24, '06 From Slough,Berkshire,UK Currently Offline Reputation: 0 (0%)  |
Hello,
I recently had to replace my window regulator, which I did through use of a guide on here (very useful) however, the window now seems to sit too high and is catching on the rubber on the door whenever I close the door unless I push the window to close it then it is ok so it doesn't need a lot of adjustment. I tried adjusting it for about 2 hours yesterday with no luck as it is still the same, is there a special way to line the window up or does anyone know if the regulator can be adjusted at all? Any help/advice is appreciated. Thank You Nathan -------------------- 1994 JDM ST205 WRC with 17" OZ Chrono's wearing 215/45/17 Eagle F1's. HKS Induction Kit, Blitz DV, Decat and full SS System, Blitz SBC-iD and Power Meter running at 1.12Bar = 17mpg and a lot of fun
 |
 |
Replies
|
Jun 26, 2006 - 7:28 AM
|
|
 Enthusiast Joined Mar 29, '06 From Hull, UK Currently Offline Reputation: 0 (0%) |
easiest would be to remove the door trim, wind the window down about half way and then unfasten the 2 bolts that hold the window onto the winding mechanism. It has a fair amount of play in it so you should be able to line it up correctly that way.
Dan |
Posts in this topic
94wrc Window Adjustment Jun 26, 2006 - 3:45 AM
94wrc I tried that and it still wont line up properly, t... Jun 26, 2006 - 10:07 AM vsideboy the mechanism should be adjustable on the door and... Jun 27, 2006 - 4:08 AM
94wrc I got a scanned page from the Chiltons manual and ... Jun 27, 2006 - 7:24 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 1:10 AM |