![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 25, '03 From Springfield, MO Currently Offline Reputation: 1 (100%) ![]() |
well i've been trying to find another route beside the ct series turbos just cause there's always morethan one way, but everytime there's a big post about anything NOT 3s then the post turns into a 5 page rant about which block is stronger, what pressurethey will hold and so on. SO if you have a GT or ST with a turbo put on then vote and put up some numbers
and please don't flame me because I know 3s's are stronger canse deal with more power, are cheaper and all that.....but I don't have one of those and I'm not lookin for much more than 200hp This post has been edited by b1gr3d: Jun 25, 2006 - 6:56 PM -------------------- Coming in 2010 full paintjob - new wheels - modified body - new interior - engine build- marriage |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 25, '03 From Springfield, MO Currently Offline Reputation: 1 (100%) ![]() |
i looked at extremeboost.com and there's a gt28r with a 60mm wheel, 60 trim and .60A/R good for up to 290hp that seems will work nicely...comp chart wise atleast. and that is if I run 10psi i will go right through the middle of the sweet spot
BTW does anyone have a comp map program so that i dont have to print these guys off and try to graph them by hand? This post has been edited by b1gr3d: Jun 26, 2006 - 2:15 PM -------------------- Coming in 2010 full paintjob - new wheels - modified body - new interior - engine build- marriage |
![]() ![]() |
Lo-Fi Version | Time is now: July 16th, 2025 - 2:22 AM |