what turbo are you using?, for NON 3s ppl... dont flame Options

[b1gr3d]

well i've been trying to find another route beside the ct series turbos just cause there's always morethan one way, but everytime there's a big post about anything NOT 3s then the post turns into a 5 page rant about which block is stronger, what pressurethey will hold and so on. SO if you have a GT or ST with a turbo put on then vote and put up some numbers



and please don't flame me because I know 3s's are stronger canse deal with more power, are cheaper and all that.....but I don't have one of those and I'm not lookin for much more than 200hp

This post has been edited by b1gr3d: Jun 25, 2006 - 6:56 PM

[b1gr3d]

i looked at extremeboost.com and there's a gt28r with a 60mm wheel, 60 trim and .60A/R good for up to 290hp that seems will work nicely...comp chart wise atleast. and that is if I run 10psi i will go right through the middle of the sweet spot

BTW does anyone have a comp map program so that i dont have to print these guys off and try to graph them by hand?

This post has been edited by b1gr3d: Jun 26, 2006 - 2:15 PM

[presure2]

i looked at extremeboost.com and there's a gt28r with a 60mm wheel, 60 trim and .60A/R good for up to 290hp that seems will work nicely...comp chart wise atleast. and that is if I run 10psi i will go right through the middle of the sweet spot

BTW does anyone have a comp map program so that i dont have to print these guys off and try to graph them by hand?

DO NOT go by ANYTHING you see on extremeboost.
jeff, the dude who owns the place is VERY well known on the mr2 board for ripping people off, and failing to deliver promised parts.
yea, he built a 800whp mr2...with money he stole from hardworking mr2oc members.
but yea, i do think the '28rs would be a fun turbo to try.