It's Alive, st205 finally is running!!!!!!!!!& Options

[lantz2121]

After 2 years of resto it finaly is running. I still need to hook up IC pipe vaclines etc. If anyone is knows about the wiring differences for the guages send me a pm. Thanks 6GC.

[WannabeGT4]

Glad to see you got it working. What do you need to know about the gauges? If you're trying to get the ST205 cluster working in your AT200 this how-to I made will walk you through it:
http://www.6gc.net/forums/index.php?showtopic=30411

If you're just trying to get the stock gauges to work you should already have all the interior plugs charted and it will just be a matter of repinning a few connectors and you'll be all set.

Let me know exactly what you need and I'll try and help you to the best of my ability.

[lantz2121]

Glad to see you got it working. What do you need to know about the gauges? If you're trying to get the ST205 cluster working in your AT200 this how-to I made will walk you through it:
http://www.6gc.net/forums/index.php?showtopic=30411

If you're just trying to get the stock gauges to work you should already have all the interior plugs charted and it will just be a matter of repinning a few connectors and you'll be all set.

Let me know exactly what you need and I'll try and help you to the best of my ability.

Well okay ther is a couple of things; first I want to know how to wire in the fuel pump so I don't have to jump the diagnostic terminals; with the resistor if easily possible or by jumping wires closer to the ecu. Second I am trying to make the st gages work with the st205 harness. The main problem I am having is that all of the wiring diagrams do not seem to have the same wire plug locations lots are not labled. ex some wires are shown by the diagrams I have and some are not. Where there is a wire the diagrams do not show it. Another guy has been helping a little he told me which wires to change to get it started, but i have no tach, fuel level, check engine light, etc. I do not know about speedo, water temp, oil etc. I have only let it run like a min or less. It idols pretty smooth for not having ic piping hooked up and lots of vaccum leaks etc. I need to know what needs re pined at the II-2 II-1 and IJ-1 connectors I think it all has to do with these three plugs. I am not a wiring expert I can repin if I had a list like II-1 to IJ-1 for example. Also there are a lot of wires from the ecu pinout that are left black on the ecu wiring pinout diagram. for example what is?
winj ac1 ats abv rly the eco cco egw els all listed on the circut board of the ecu and have wires to something.
And last what needs changed at the ea1 fusebox plug to make the fans work properly. Thanks lance