![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) ![]() |
does the apexi safc2 work with the 7afe? and do i need anything besides the unit itself? i might be able to get a slightly used one for about $150, and i'm wondering what else i'd need to make it work, how hard the install is, and what sort of gains i *could* see with the 'bolt ons' i have, those are listed in my signature. i supposed the best benefit of it would be improved fuel milage.
now, being a 93....i really dont have a good way to monitor the a/f besides my fluke meter hooked to the ox1 on the diagnostics port. but the stock O2 sensor is of course a narrow band sensor, by watching the O2 voltages could i equate those to a/f well enough to get a decent tune? -------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) ![]() |
i got my aem 6in1 eugo wideband on the way, brand new for $250 shipped.
safc2 should be ordered soo for about $150, lightly used but complete. what size are the stock 7afe injectors? also, i found a dynojet at a bussiness at a ford dealer about 15 min from my house, i left them a message after work and am hoping to hear from them sometime soon. i'd like to make a baseline before tune and then a few runs after i feel like i have a good tune going on. This post has been edited by Bitter: Jun 28, 2006 - 5:41 PM -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: September 15th, 2025 - 11:59 AM |