3sgte wiring question Might have it solved!, it found a home, need confirmation!!! Options

[jcbass7]

well after two days of an intense puzzle known as wiring.. i have all but one connecter identified and plugged in. It is at the driver side of the intake manifold and i cannot seem to locate the other place to hook it in. Im guessing its a sensor or something that i dont have but im not sure.. here are some pics:






ALSO: what do i do about this oxygen sensor ? it is the lower of the two on the Down pipe:



This post has been edited by jcbass7: Jun 30, 2006 - 2:08 PM

[jcbass7]

OK

i have that one gray plug left, and i traced the wires to the 26 pin connector for the ECU.

the two wires coming from the gray plug go into the 3rd, and 23rd spots on the ecu plug. I looked at my USDM wiring chart for the 3sgte and it says the #3 pin goes to the ignitor.. and that there is no pin in the 23rd spot..


my engine is a 93 JDM all trac..

anyone know if this plug goes anywhere, or where it might go?

PS: it is the gray plug in the pics above

This post has been edited by jcbass7: Jun 29, 2006 - 3:54 PM