5SGTE INFO Options

[Valo666]

So, i wanna turbo my motor, but dont wanna risk blowing another head. Ive poped two heads so far and the head on my new motor is ticking already. So im thinking that what i might do over the next little while is build up a hybrid 5sfe and 3sgte motor. I know ive already seen some info on a motor like this. I was thinking 5s block, 3s head, and oil pan, 5s intake manifold with throttel body, 2 bar map, tubular equal length turbo manifold, ct20 or a t3/t4 turbo. Just run ARP bolt on the head, and stock enternals in the block. Would this work?/what majour problems would i have making this motor? finding, buying, building the motor not a problem.

[Valo666]

I think the big issue with it is the water jacket.. they dont seem to match up properly causing poor cooling of the block and head.

not a big issue for me. If i build the motor, im gonna send the block to my buddies shop because they have a hudge machine shop. Ill get him to mill out the waterjackets

So, i wanna turbo my motor, but dont wanna risk blowing another head. Ive poped two heads so far and the head on my new motor is ticking already. So im thinking that what i might do over the next little while is build up a hybrid 5sfe and 3sgte motor. I know ive already seen some info on a motor like this. I was thinking 5s block, 3s head, and oil pan, 5s intake manifold with throttel body, 2 bar map, tubular equal length turbo manifold, ct20 or a t3/t4 turbo. Just run ARP bolt on the head, and stock enternals in the block. Would this work?/what majour problems would i have making this motor? finding, buying, building the motor not a problem.

well, you cant use the 5s intake mani on the 3s
the best way to look at a 5sgte is to think of it as a 3s swap, with a 5s bottom end.
youll need to run the 3s ECU, and to actually benifit from the extra displacment, you'll need to run some form of EMS.

so pretty much, buy a 3sgte, and a 5s block. As for the ems..i can get AEM ones for cheap for my work..like $1200 cheaper than list.