3sgte wiring question Might have it solved!, it found a home, need confirmation!!! Options

[jcbass7]

well after two days of an intense puzzle known as wiring.. i have all but one connecter identified and plugged in. It is at the driver side of the intake manifold and i cannot seem to locate the other place to hook it in. Im guessing its a sensor or something that i dont have but im not sure.. here are some pics:






ALSO: what do i do about this oxygen sensor ? it is the lower of the two on the Down pipe:



This post has been edited by jcbass7: Jun 30, 2006 - 2:08 PM

[jcbass7]

ok so after looking far into my coupe i found that the gray plug is a plug from the 5sfe harness and plugs into this:




now do i transfer this over to the 3sgte??


the 3sgte already has this orangeish brown one that is very similiar:



do i//

A. hook up the one from the 5sfe too? (if so where do i free up the extra vac lines?
B. leave it unplugged
C. plug it in but do not plug in vac lines?
D. something else i can't think of...



Thanks guys