![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) ![]() |
does the apexi safc2 work with the 7afe? and do i need anything besides the unit itself? i might be able to get a slightly used one for about $150, and i'm wondering what else i'd need to make it work, how hard the install is, and what sort of gains i *could* see with the 'bolt ons' i have, those are listed in my signature. i supposed the best benefit of it would be improved fuel milage.
now, being a 93....i really dont have a good way to monitor the a/f besides my fluke meter hooked to the ox1 on the diagnostics port. but the stock O2 sensor is of course a narrow band sensor, by watching the O2 voltages could i equate those to a/f well enough to get a decent tune? -------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) ![]() |
well i wanted to tune with the header, and most importantly learn HOW TO tune, since ive never ever done it before. you can read and read and study, but its no substitute for doing it yourself
![]() this is a $400 investment that can get easily yanked and installed over and over again from car to car that i'll own over the years. since i have advanced the timing i'm shooting for 12:1 INITIAIALLY, then if that goes well i'll lean till i get a little knock, then richen it a little to be safe. or should i go about it differently? -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: June 10th, 2025 - 4:30 PM |