![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Oct 3, '05 From Houston, Texas Currently Offline Reputation: 12 (100%) ![]() |
I have a stocked out 94 st and my take off is really slow. This has just been happening recently. I can floor it and more noise than anything is happening. Does anybody know what might be wrong.
For example I can floor it in gravel and it doesn't even burn out, it's kinda scary entering a Hwy. and your barely moving. |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Oct 3, '05 From Houston, Texas Currently Offline Reputation: 12 (100%) ![]() |
QUOTE set the timing to base, which is 10 degress below top dead center, change up to a high octane fuel and see if the knocking goes away. if it does then the issue is carbon buildup or something else causing a hotspot. make sure the plugs are the correct heatrange. If I recall right I did use a higher octane because I read that in the chiltons manual but I did'nt see no difference to tell you the truth it felt like I wasted more gas. If it is carbon build up or hotspot what can I do to treat it. |
![]() ![]() |
Lo-Fi Version | Time is now: August 22nd, 2025 - 6:28 PM |