Indiglo Install, I read everything, but still have one slight Q Options

[LeonStryfe]

Alright, any advice on how to remove the black plastic cover above the needle. How to safetly remove it?

Where should I tap my power from? Is there another good place to tap power from

What color is the parking light fuse?

Thanks in advance

Leon

[LeonStryfe]

I got them installed but I figured, it was too good to be true that it didnt have any problems. Well anyway it did

I did not take off the neeldes at all. I was toough but I was able to put it in there. Everything seems to be working well, except for two things.

1 - Which I'm worried about. My speedo seems to be delayed or something. For example. I brake on a stop light. As soon as it turns green, I accelerate and it just stays 0. Then when I hit like 20 mph it just jumps. So I thought, damn it's stuck. But then whats weird is that, as I was driving I stop just for like a moment as it reached 0 mph I accelerated again and it just went back up like its normal. Anyway I could fix this? Also what's bothering me is that, if its really delayed int he beginning, does that mean my speed is off? Like in the highway I'm hitting 70 mph, am I really hitting 70 mph?

2 - uhhhhhm the gauges aint working -_- I dont know where I went wrong. I'll probably try again tomorrow and see whats up. I used a tap connector and split the solid green wire in the dimmer switch. And of course I thought since thje gauge didnt light up, it would be the dimmer's fault, it wasnt. The dimmer was workign perfectly. Everything seems to work except the gauge. maybe I think it might be the grounding? I just wrapped it around an area near the long tube like behind it. Metallic ofcourse. I'm 100% sure that + side is tapped correctly. Is the white-black wire in the dimmer the ground?

Anyway I'd appreciate any advice on any of the two.