![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 28, '06 From Brooklyn, New York Currently Offline Reputation: 1 (100%) ![]() |
I was wondering if this wiring diagram will work? I know a couple of friends who as well as myself who arent lucky to have the stock fog lights. I just got a pair of fogs as well, but however, I only have the fogs without the wirings. So after reading up on some stuff I was wondering if this wiring diagram will work? Any inputs? If it does, hopely it'll help those who wants to install whatever type of fogs into their car.
![]() As for the relay as reference to you guys, this was given to me by K-ESD who helped me a lot regarding wiring. ![]() Please tell me if its wrong so I can correct it. Once I get all inputs I'll try it out and see if it works. This post has been edited by LeonStryfe: Jul 17, 2006 - 7:30 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '03 From 캘리포니아 Currently Offline Reputation: 23 (100%) ![]() |
OK, your turn signals should have 3 wires attached to the bulb connector.
1- 12v with parking lights on (GREEN) 2- Ground (-) (WHITE-BLACK) 3- 12v switched for turn signals (GREEN-BLACK=Left) (GREEN-YELLOW=Right) You are going to want to splice into the first wire. Im guessing the blue wire you mention is for your halos? you would just splice that wire into the GREEN 12v so that your halos will turn on when your sidemarkers and parking lights turn on. If you leave the blue wire unpluged then your fogs should still work, but your halos will not light up. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 5:27 AM |