3SGTE questions, really need a faq on this! Options

[Uppitycracker]

Ok well I used to come to this site alot because I really like the toyota celica. As of right now I still own my first car, a mazda mx-3, well Im sick of it, its going to cost me mega $$ to get it where I want it. So Im going to get a celica for the fall and do a swap hopefully over the winter. So Ive searched trying to find some straight forward info on this swap and there really isnt.

So far all Ive gethered is you need a wiring harness, also and ecu and IM is on everyones list. Ill be ordering a complete engine which includes the ecu and hopefully the harness, Ill ask before I order. Do to ontario law i wont need the IM since my car can be classified as a hotrod and tested under 1980's emmision standards.

So heres my question, when I order this engine is that that? Will it drop right in and just adopt all my old parts, or will I need things to make it work? It comes from a awd car, correct? So what does this imply for a fwd car? So please all the info you could give me would be great, a shopping list of EVERY part needed or recomended would be great. I would also suggest adding a walk through of the swap to a faq section.

Thanks alot!
Timothy Dawson

[Uppitycracker]

QUOTE (Teyaku @ Jul 12, 2003 - 7:10 PM)

[/QUOTE] Your ECU controls the engine...it reads input from the sensors located all over the engine bay. I honestly didn't know anything about wiring in a car...but you have to remember something...wiring is simply electric current flowing through a circuit through wires and fuses...sensors are volt signals..it's not all that complicated...basically when it comes to wiring...just plug the connectors in BTW what did you mean by the 3sgte being a j-spec engine??? J-spec is referring to Japan...as my motor is a J-spec 3rd gen 3sgte...a 3sgte is just the engine code. In America we got the 1st and 2nd gen or USDM's...200HP and 225HP...the 3rd gen J-Spec is 255HP and Euro engines were 245HP.

What I mean by jspec is its a engine from japan! The site that carries them says its from there scrap yards in Japan. I know the difference between codes and areas of origin. Also for some swaps it is just a matter of plug and play, with this swap it seems to be a little more complicated then that, Im familiar with the physics of analog and digital components. What people have said is there is some rewiring required for this swap on the ecu aswell as in the car, which is beyond my understanding, and Im sure beyond the mechanics aswell (maybe Im under estimating the schooling of a mechanic) so I would like more detailed info, and Im so serious when say this, every post you look up is like 2 car guys trying disprove the other, its frustrating, so once again a well written unbiased faq would be great. Something a laimen could understand. OK so new axles since Im also unfamiliar with that area where do people usually get these done?