cv shaft/clunking noise/ABS Options

[root]

Ok, where to start....First off I recently replaced both cv shafts to cure the loud clicking sound I got when I turn and shift. I didn't have any problems for a while, but then I started hearing this *clunk* when I leave off the gas in 2nd or 3rd. It sounded like it was comeing form the left front, so I came to the conclusion that the new cv shaft may have been defective. I returned my shaft for another one and I just put that one in two days ago. While I was installing that one, I noticed that cv shaft didn't look right when I fit it into the hub. I took it out for a spin and guess what.....now my abs kicks in everytime I stop.....and I still hear that retarded *clunk* when I leave off the gas. I read in an older thread that it may be the motor mounts that are causing the clunking noise. If so, how much hell am I looking at for replacing those? As far as my brakes go, I pulled the ABS relay to temporarly (sp?) fix that, but thats not a real solution to the problem. I know I'll have to proably switch out that shaft for one that fits properly, but I don't wanna deal with the same people or the same part again. Does anybody know where to find a decent cv shaft that will work. I would prefer a non-reman.

Thanks for listening.

[Bitter]

did the new shaft have the ABS ring? is the new shaft pushed in all the way? if it didnt snap into place then thats your problem. it can be difficult on the passenger side since its longer.