![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 25, '05 From Fort Wayne, IN Currently Offline Reputation: 14 (100%) ![]() |
Ok, so we got our new wheels and tires mated together today.
18x8 HP Racing HPR5 Wheels and 215/35-18 General Exclaim UHP tires. Here's the problem. I feel that the 215's are just too narrow for the 8" wide rim. The sidewall just bows out a little too much for our taste/comfort level. That said, we're looking at selling the Exclaim UHP's and purchasing a wider tire. A 235/30 would be PERFECT, but no one seems to make one. What are you 8" wide rim guys running in terms of tire sizing and keeping very near the stock diameter. Right now it looks like the best compromise will be a 225/35-18, but I'm a little weary on how well the 225's will be width-wise. Thoughts?? -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
way back when I had my 16X8 wheels I had 225/55 tires. They rubbed a little bit when you have the wheel cranked. They did, however, provide lip protection. It looked good. I didn't even know they made 30 profile tires. That would have to be the sh*ttiest ride ever.
Definately do not do a 30 profile, or your back will not be happy with you. I would go 40 profile, but depending on how far you are going to lower it, of any, because of rubbing. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() ![]() |
Lo-Fi Version | Time is now: September 24th, 2025 - 12:48 AM |