Jul 24, 2006 - 9:26 PM
|
|
|
Enthusiast Joined Jul 17, '06 From Saskatoon, Saskatchewan, Canada Currently Offline Reputation: 0 (0%) |
Hey, I'm new to the board. I just bought my 6gc about 3 weeks ago. I used to drive a 85 mr2. I'm just starting with some maintenance on my 6gc before I start with some mods.
I was driving yesterday when my check engine light came on. Diagnostics has given me a error code #41 (Throttle Position Sensor). My Hanes manual says I should have the TPS replaced by a shop, but I really don't want to spend the $$ if I don't have to. I can buy a new TPS online for $80 but I don't know how to install it. Anyone know how or have done this? -Jordo |
![]() |
Jul 27, 2006 - 2:04 PM
|
|
|
Enthusiast Joined Jul 10, '05 From OTtawa Kansas Currently Offline Reputation: 0 (0%) |
Hey if you do change your TPS take the the whole unit off butterfly and all its a bitch to get the botton screwww on those thiings especially if its a philips bolt like mine was just make sure you put that seal back on right and understand that that TPS is very sensitive it can raise and lower your idle with the littlest nudge u might have to toy with it to get your idle back in place good luck
|
jordo How do you change the TPS? Jul 24, 2006 - 9:26 PM
jordo Also I noticed that the TPS is located right behin... Jul 24, 2006 - 9:42 PM
puretone open intake? horrible, it could possibly have mess... Jul 25, 2006 - 1:40 AM
Tech9ine Whats this i here about your TPS reports? didn... Jul 27, 2006 - 2:13 PM
puretone QUOTE(Tech9ine @ Jul 27, 2006 - 2:13... Jul 27, 2006 - 5:30 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 26th, 2026 - 12:39 PM |