![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jun 15, '06 From NJ Currently Offline Reputation: 1 (100%) ![]() |
So in between waiting for parts to come in, i decided to see what wiring would be necessary to make the swap work 100%. So far (to my extreme pleasure) it looks like 99% will be plug and play. It looks like the only parts i need to wire in are the intercooler pump and fuel resistor/relay, can anyone confirm I didnt miss
any obscure wiring? I plan to unloom and unpin the relay box/pump wires that go to connector EA1 from the clip and simply pin them in the the EA1 on my original harness, sound like a good idea? Also i plan to wire in the cruise control, seems like all i need to do is run a wire from the CC ecu to the IDL pin on the ecu, everything else should be plug and play, has anyone done this? |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
good gob man. keep us updated on how things go!
-------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: July 29th, 2025 - 4:15 PM |