96 st205 to 94 GT wiring, well seems easy enough Options

[cheeco]

So in between waiting for parts to come in, i decided to see what wiring would be necessary to make the swap work 100%. So far (to my extreme pleasure) it looks like 99% will be plug and play. It looks like the only parts i need to wire in are the intercooler pump and fuel resistor/relay, can anyone confirm I didnt miss
any obscure wiring? I plan to unloom and unpin the relay box/pump wires that go to connector EA1 from the clip and simply pin them in the the EA1 on my original harness, sound like a good idea?

Also i plan to wire in the cruise control, seems like all i need to do is run a wire from the CC ecu to the IDL pin on the ecu, everything else should be plug and play, has anyone done this?

[cheeco]

Thanks for the feedback, i see the wire your talking about, LG-B goes to the ECU via EA1 pin 9 on the 5sfe. shouldent have to wire that up since it doesnt run to the ECU on the 3s. but now im curious as to what pin 9 in EA1 runs to in the 3s harness...