6G Celicas Forums

Welcome Guest ( Log In | Register )

> Right Rear Speaker...
post Aug 9, 2006 - 12:33 PM
+Quote Post
laff09

Enthusiast
***
Joined Jul 28, '06
From Delaware
Currently Offline

Reputation: 0 (0%)




...no longer works. Its not fuzzy or distorted; it just doesnt sound like its connected. I took off the right rear interior panel, and zipped out the screws. everything appears to be hooked up correctly, except that the smaller of the 2 connections (the little metal bracket fitted on your speakers for the speaker wire) appears like the moron at best buy bent it back and forth a few times. Its still connected...but you can tell that a few more bends in either direction will break it off. Anyone know if this is the issue? or is it a wiring issue? I suppose I should take off the left speaker and hook it up, but interior panels in the 6th gen are a PITA. I don't think it is a fuse b/c i was under the impression that the fuse for the speakers effected all of the speakers. Any opinions or suggestions are welcome
 
Start new topic
Replies
post Aug 9, 2006 - 3:29 PM
+Quote Post
jess_i_74



Enthusiast
**
Joined Sep 19, '05
Currently Offline

Reputation: 3 (100%)




I assume you're looking at something like this?

IPB Image

If it's the wire side, then make sure the "jaws" are closed enough to contact. It's super easy to crimp a new one on from your hardware/electrical/store. Look for a 14-16 awg quick disconnect female.

If it's the speaker side, you're a little more screwed.



--------------------

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 26th, 2025 - 7:59 AM