Aug 10, 2006 - 1:03 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Sep 9, '02 From Scranton, Pa Currently Offline Reputation: 7 (100%) |
im in the middle of my FMIC install, i have everything torn apart and were looking for any pictures or info on how any of you guys remounted the WG......
ill be posting pictures of my install later aswell!!!!!!! thanks for in the info *in searching here and alltrac.net i see no mention of removing the roll pin on the compressor housing, but inorder to reposition it. its gotta get pulled. This post has been edited by zipstrips: Aug 13, 2006 - 11:32 AM |
alltracman78 Yes, the pin has to be removed.
You will have to ... Aug 10, 2006 - 6:51 PM
zipstrips so the celica is torn apart again. i found my ssau... Aug 10, 2006 - 7:16 PM
lagos you mount the wg in the same place as it was befor... Aug 10, 2006 - 8:07 PM
Dr_Tweak I have made a bracket that I will be producing and... Aug 10, 2006 - 9:53 PM
zipstrips Dr. Tweak, from my searching and seeing how others... Aug 11, 2006 - 12:52 AM
Dr_Tweak Well show us a pic of your wastegate actuator and ... Aug 11, 2006 - 11:12 AM
alltracman78 Don't forget.
Some folks [like me] have the Su... Aug 11, 2006 - 7:57 PM
zipstrips QUOTE(Dr_Tweak @ Aug 11, 2006 - 9:12... Aug 12, 2006 - 9:37 AM
zipstrips and the finished product is. . .
2nd gen 3s wi... Aug 13, 2006 - 11:30 AM
celicast3sgte nice man, nice IC sprayer too. Aug 13, 2006 - 11:56 AM
lagos nice job. i like the route you took with the pipin... Aug 13, 2006 - 12:00 PM
zipstrips QUOTE(lagos @ Aug 13, 2006 - 10:00 A... Aug 13, 2006 - 1:45 PM
Steevo Water Wetter, Distilled Water and some FW-15 (ford... Aug 13, 2006 - 2:52 PM
lagos QUOTE(zipstrips @ Aug 13, 2006 - 2:4... Aug 13, 2006 - 3:36 PM
zipstrips yes the fans are going the correct direction. i do... Aug 13, 2006 - 4:15 PM
lagos you should have said something at the meet. i had ... Aug 13, 2006 - 4:22 PM
zipstrips QUOTE(lagos @ Aug 13, 2006 - 2:22 PM... Aug 13, 2006 - 8:59 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 21st, 2025 - 12:53 PM |