If I can't get traction with THESE..., The Quest for more Traction is on! Options

[presure2]

so yea...wheelspin all thru 1st and 2nd gear makes for a cool show for your friends...but super slow times at the track.
so, with that in mind (and the aweful though of ripping thru a set of michelins @ 175$ea..) i went ahead and ordered these:

yup, BFG's 225/50/15
contact patch is a tiny bit over 9"

that alone should have a nice effect on traction, never mind the nice sticky compound.

a couple more of the tread pattern, and sidewall.





i figure if hyde can run 1.4 60ft. times with them, i should at least be able to improve traction somewhatlol
if all goes as planned, i'll be seeing what the 5SFTE can do with TRACTION @ englishtown on the 18th
ill be installing them on a set of stockers, and starting them @ ~20psi, lowering by a lb or 2 each run, till the 60's dont improve anymore.
comments? sugesstions? discuss!

[presure2]

a quick update:
got them mounted on the stock rims yesterday.
my 17" enkies + michelin pilot sport a/s 225/45's weigh 41lbs.
stock 15" rims and BFG DR's 225/50's weigh 39lbs.
i put them on, and with 30lbs of pressure in them, did a nice burnout and a few launches..
i had the camara with me, but i forgot to put the memory card in!!
needless to say, i cant launch @ 2000 rpm and expect to spin on these tires like the old falkens...lmao...i just bogged down. lmao...3000rpm was a little better, a little wheelspin, but not nearly as much as before, and thats with 30lbs in them! (bf goodrich recommends 14-20lbs for racing.)
initial impressions are VERY good, to say the least.
i cant wait to see how they are on the track!