 Need help from ppl with 3s swap |
 Aug 11, 2006 - 2:59 PM
|
 
|
|
Enthusiast  Joined Aug 14, '05 From St. Paul, MN(USA) Currently Offline Reputation: 8 (100%)  |
Im using a 93 mr2t tranny non-lsd and I need to know if the passenger side axle comes with that long piece (i think the intermediate shaft) that goes in the tranny if i buy it from the dealer or elsewhere? or could i use my 5sfe one?
|
 |
Replies
|
Aug 11, 2006 - 7:18 PM
|
|
 Enthusiast Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
I don't know what these other yahoos thought you were saying but this is what you need to do:
Buy just the inner stub for the MR2 P/N: 43049-32030 As you can see it will inlude the part that slides into the trans and bolts to the ST185 axle:  Buy the whole axle for the ST185: P/N: 43410-32113 Unbolt the ST185 inner stub replace it with the MR2 Inner stub. Supersprynt was having issues with the with the carrier bearing lining up so you may want the MR2 carrier bearing bracket as well. P/N: 43457-17010 You'll also need a spacer from a spare/junked axle and some longer bolts: http://www.6gc.net/forums/index.php?showtopic=32626 --------------------  Project ST204.5 99.88946% complete... |
Posts in this topic
team_omega Need help from ppl with 3s swap Aug 11, 2006 - 2:59 PM
Rjb23 if the passenger side axle comes with that long pi... Aug 11, 2006 - 5:08 PM jgreening They are not too expensive from Toyota either. I ... Aug 11, 2006 - 5:28 PM jgreening YAHHHOOOOOOO!
My mistake. Aug 11, 2006 - 7:22 PM
team_omega thanks again wannabe....lol...i needed to make sur... Aug 12, 2006 - 11:32 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 9:07 AM |