BOV with recirc options Options

[brianforster]

ok two questions, i need a cheap and easy recirc valve cause i dont really mind not having the cool sound, and id rather my car run as smoothly as possible..

my friend got one from forge motorsports, he really likes it, my question is whats the easiest and cheapest way to attatch a valve like this? get a piece of straight pipe and have a nipple pressed in? then connect the nipple to the BOV with a hose?

im also thinking about the greddy rs, a little more expensive though.

the stock BPV would be nice too but i dont think theres a clean and easy way to get that to work with my FMIC piping.

[playr158]

forge is good...its a diverter valve...i personally recommend the Forge 007 DV

and yes basically take a piece of your intercooler pipe and have a 1" diameter pipe about 2" long welded onto it to make a "T"

you can clamp a hose to that "T" and then to the diverter valve..and then do the same T thing for your intake hose and run a hose from the DV to teh intake..

and he has a 3sgte motor which is AFM/MAF 2nd gen..

This post has been edited by playr158: Aug 16, 2006 - 2:07 PM