Engine Running Funny, Cuts off with low RPM Options

[Jaws4God]

Hey guys.. need advice please!

I was repainting some of the engine parts last night for a show today, Repainted the valve cover, and a few of the fuse box covers.. well when I get back in the car the next morning.. it won't start. No click or anything.

We thought it might be a dead battery, so we try jumping it but still nothing. Headlights come on and look bright so I think battery is fine.

We then figure its the starter, so we pull it out and go to Advance Auto and they check it, say its bad. So I replace it. But still.. nothing.

Then I noticed my Viper alarm isn't working at all.. looks like it has no power. So I find the wires that run to the ignition and find one for Starter Output, unplug that and still .. nothing..

so now i'm at a loss.

If anyone knows what it could be or a way to help find the problem. PLEASE let me know!

Thank you all!

This post has been edited by Jaws4God: Aug 23, 2006 - 6:50 AM

[Jaws4God]

Well my friends dad just came over and helped me do some more tests.. we found that the short is somewhere after the ignition switch but is not in the distributor or the ignitor. All thats left on the circuit is a "noise filter" but we couldn't find that to test it. If its not that, then we are assuming its an actual short in the wire somewhere..



does anyone know where the noise filter is located? have a pic of it?

Thanks!

This post has been edited by Jaws4God: Aug 20, 2006 - 4:26 PM