 fuse size? |
 Aug 22, 2006 - 2:18 PM
|
 
|
 Enthusiast  Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%)  |
i just wanted to doubble check with you guys to see what fuse size i should be using for my subs. i have 2 10in subs powered by a 275watt amp. im using an 8 gauge wire with a 30amp fuse right now without any problems.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
 |
Replies
|
Sep 1, 2006 - 1:48 AM
|
|
|
Enthusiast Joined Sep 1, '06 From Michigan Currently Offline Reputation: 0 (0%) |
QUOTE(OntarioCeli @ Aug 23, 2006 - 10:57 PM) [snapback]472247[/snapback] Go by the fuse size on the amp. If the amp has a 40 amp fuse run a 40 amp on your power line. If your amp has two fuses say two 20amps add them up 20+20= 40 again use a 40 amp fuse and so on... This is what i go by. I also go with same size ground wire as power. that gauge wire btw is fine for that high of a load. A good unproffesional way to check it, is after you listen to them for a while, touch the wire, see if its warm, if so you may consider replacing it with a bigger gauge. But you should be fine. --------------------  |
Posts in this topic
lagos fuse size? Aug 22, 2006 - 2:18 PM
Coomer I run that size fuse as well with about a 300 watt... Aug 22, 2006 - 3:16 PM elvasoshexai i thought the fuse size has to do with ur amp(s)..... Aug 23, 2006 - 10:37 PM OntarioCeli Go by the fuse size on the amp. If the amp has a ... Aug 23, 2006 - 10:57 PM
soven You are fusing for the wire not the amp....
The a... Sep 3, 2006 - 6:56 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 20th, 2025 - 7:43 PM |