Invader Body Kit, Help with prefit. Options

[LeonStryfe]

I have skirts and front and I want to install them for pre-fitment. I need help. Anyone with experience with vader kit that lives near NYC area?

If not, online help would be nice as well.

First of all, the side skirts? I have a pretty good idea but not a lot. Any info?

Thanks again!!!!!!!

[MaskedMan]

i would drill some holes into the fiberglass instead of just using a self tapping screw. this will help decrease the risk of cracking the fiberglass. but thats just my opinion. As for the metal, i would drill a small guide hole so that the screw will go in easier and more accuratly. The hole that you drill for your skirts should be slightly larger than the hole you drill in the metal, but should not be larger than the head of the screw. The screw should not thread into the fiberglass, it should only tread into metal. I used to have screws in mine, but i changed mine to rivets. I figured im never going to need to remove my sideskirts, but even if i wanted to remove them i could. Rivets hold tight and dont strip