 replacing a cv axle |
 Sep 3, 2006 - 2:48 PM
|
 
|
|
Enthusiast Joined Jul 28, '06 From Los Angeles, CA Currently Offline Reputation: 0 (0%)  |
So this weekend I decided to tackle the passenger side axle of my 95 st. Well after a long removal process I got the old one out and got the new one in. I bought a seal from Advance Auto, and it just slipped over the axle shaft and seems to cover the hole where the shaft slips into the transmission. The problem that I am having now is there is a very small leak coming from the transmission where the axle goes in.
Any help on what might be causing this would be much appreciated. Let me know if any extra info would be helpful. |
 |
Replies
|
Sep 3, 2006 - 3:26 PM
|
|
|
Enthusiast Joined Jul 28, '06 From Los Angeles, CA Currently Offline Reputation: 0 (0%) |
I believe so, it wouldn't go in any further, and the leak stopped when it went it, I just went back out and there it was leaking again. It had to wait until I got all the bolts in. I am wondering if I maybe damaged the seal inside the transmission that the shaft goes through or if I didn't put on the seal from Advance Auto right.
|
Posts in this topic
xelan replacing a cv axle Sep 3, 2006 - 2:48 PM
Bitter did the axle snap into place all the way? Sep 3, 2006 - 3:23 PM Bitter its possible the new seal isnt aligned correctly, ... Sep 3, 2006 - 3:29 PM hitcachi you've got to make sure that the seal has seat... Sep 3, 2006 - 4:29 PM xelan Lol. So my noobness just showed, I think I put on ... Sep 3, 2006 - 4:56 PM Bitter doh!
make sure you lube the axle and seal wi... Sep 3, 2006 - 4:58 PM xelan Well I am back, the seal that is in the tranny is ... Sep 3, 2006 - 5:35 PM Bitter use a big flatblade screwdriver to pry it out. yo... Sep 3, 2006 - 6:38 PM
xelan Thank you Bitter and Hitcachi, I got the seal out ... Sep 3, 2006 - 7:41 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 4th, 2025 - 7:08 PM |