6G Celicas Forums

Welcome Guest ( Log In | Register )

> Need help with the gt4 front bumper, I still have the stock crash bar
post Sep 7, 2006 - 6:18 PM
+Quote Post
Baddica95



Enthusiast
*
Joined Mar 31, '04
From Milwaukee
Currently Offline

Reputation: 2 (100%)




I need help from those who have cut their stock crash bars in order to get there bumpers on..i dont know exactly where to cut and what not..Any information would be nice..thanks a bunch


Ryan
 
Start new topic
Replies
post Sep 10, 2006 - 11:19 AM
+Quote Post
azian_advanced



Enthusiast
*****
Joined Apr 18, '05
From Calgary
Currently Offline

Reputation: 20 (100%)




you will be left with that 2-inch bar. note, that the gt4 bar is curved forward while the stock bar is basically flat in the front.. so no matter what, the bar won't perfectly sit flush in the gt4 bumper absorber.

some people have put on their front aftermarket bumpers without the crash bar. but is highly not recommended. if you think of it this way, the bumper's made of plastic (or fiberglass for aftermarket ones) and if you hit an obstacle/wall/post, that plastic will break depending on how hard you hit it. that'll obviously cost you $$$ for repairs down the road since the plastic isn't hard enough to stop the car.
i'd suggest you buy the actual gt4 bar.. it costs ~$91 from toyotaworld. don't forget to buy the frame rail brackets if you decide to go this way.

Reinforcement Bar 52131-20220
Frame Bracket
RH 57201-20060
Frame Bracket
LH 57202-20070


--------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 21st, 2025 - 9:30 AM