![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jun 3, '06 Currently Offline Reputation: 0 (0%) ![]() |
Im a noob at this and i have been trying to do some resaech on the internet but i cannot find out what i need so i was wonderin if u all could help me out. I got a headunit i like in my car and i was wanting to put in 2 6x9s and just put them in there own box and leave the stock speakers alone. But my question is what all do i need to do to hook them up....do i need a amp and if so a mono or dual channel amp. Or could i just run them off the rear speaker wire and splice them into them but that seems lke it wouldnt work and just not sound good but like i said im new at speaker stuff.
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 6, '06 From massachusetts Currently Offline Reputation: 30 (97%) ![]() |
the speakers would be fine if you ran them off of your deck. But youll have to check and see if you have the pre outs. other than that you should be ok. all you would need to do is get a small amp and run it through your deck. OR you could splice them into your rear speakers. Ive seen that done before and it sounds ok. Its really up to you.
This post has been edited by massbrandon: Sep 10, 2006 - 2:12 PM |
![]() ![]() |
Lo-Fi Version | Time is now: September 2nd, 2025 - 12:22 PM |